Home Image

Report: No marked improvement in Canadian manufacturing in April

The seasonally adjusted S&P Global Canada Manufacturing Purchasing Managers’ Index (PMI) posted 50.2 during April, up from March’s 48.6. This was just above the crucial 50.0 no-change mark that separates growth from contraction, the index signalled a marginal improvement in operating conditions since the previous month.

Operating conditions in Canada’s manufacturing sector were little-changed during April. Although output and employment both increased, order books fell modestly. Firms were cautious regarding their purchasing and stock management policies. Confidence in the future was a little lower, whilst input prices increased at a sharper rate. Output prices, however, rose to the weakest degree in nearly three years.

Growth was linked to a marginal rise in output. Firms attributed this in part to a rise in capacity capabilities, with some panellists signalling better stability in labour provision. Employment growth was sustained, and the rate of increase accelerated since March to reach its highest level since June 2022. Companies reported that jobs were added in anticipation of higher sales, but also to help to keep on top of workloads. Levels of work outstanding declined for a ninth successive month, and the rate of contraction was again solid.

Commenting on the latest survey results, Paul Smith, economics director at S&P Global Market Intelligence said, “Although Canada’s manufacturing sector returned to growth in April, it did so only marginally with underlying data suggesting the recovery remained on shaky ground. Output and employment growth were sustained, but another drop in new orders is probably the most notable development. Clients are hesitant in their spending decisions, unsure of the direction of the economy at a time when prices remain high.”

Firms were able to make cuts to backlogs due to extra capacity and increased output, but also because incoming new orders fell modestly for a second successive month. Export sales were also down again, extending the current sequence of contraction to just under a year. Firms reported hesitancy amongst clients in decision-making, reflective in part of ongoing concerns over elevated inflation and the future direction of the economy. These factors also weighed on confidence amongst Canadian manufacturers themselves, with optimism down on March’s 11-month high and to a level just below trend.

Prices paid for inputs rose sharply in April, with the rate of inflation accelerating to its highest level of the year so far. Companies signalled costs were rising generally across a wide range of goods. Higher transportation costs were also cited as a factor driving inflation. There were also reports of higher supplier surcharges being applied. This was despite some signs of improved stability in the supply of inputs. The latest data showed that average lead times worsened again in April, but only slightly and to the smallest degree in over three-and-a-half years of worsening supplier performance.

Reduced demand also lowered pressure on vendors. Manufacturers cut their purchasing activity for a ninth successive month. Companies were hesitant in their spending against a backdrop of underwhelming sales and demand. Firms instead chose to utilize stocks wherever possible, cutting their inventories of purchases for a ninth successive month. However, the rate of contraction was modest, and much lower than in March.

With manufacturers facing the opposing forces of sharply rising input costs but soft sales, output charges continued to be increased during April. However, the rate of inflation was the lowest recorded by the survey in just under three years.

Smith added, “Cost inflation especially remains stubbornly high, with prices increasing to the strongest degree of the year so far. But manufacturers found themselves facing a tricky dilemma: although margins are under pressure from elevated costs, equally underwhelming demand is bearing down on their pricing power. No wonder then that firms continued to adopt cautious approaches to purchasing and stock management, and that confidence in the future took a knock in April.”

Reposted from https://www.automationmag.com/canadian-manufacturing-april-2023/

Finished Cut

Stay up to date on industry news, information, events and funding! Sign up to receive our monthly newsletter each month!

We don’t spam! Read our [link]privacy policy[/link] for more info.


Share

CAMM welcomes our corporate sponsors

Progressive Components

CAMM welcomes our partners